Fluid Handling Systems
* Filling / Dosing / Metering Systems
* Accurate Measuring & filling with anti-dripping Guns for
Viscous / Non Viscous / Corrosive / Volatile fluids
* Microprocessor / PLC based systems
Liquid / Oil Dispensers
Range:
1 L - 100 L
10 ml - 100 ml
0.1 L - 10 L
100 L - 10,000 L
Dispensing Time:
2 sec - 60 sec
1 min - 60 min
1 hour......
Types:
By Volume
By Flow measurement
* Liquid column height is measured and volume of liquid is dispensed.
* Flow is measured through PD Flowmeter and controller dispensing of fluid stops at preset value.
* Total solution for Fluid Handling in the plant. From transfer of fluid from Tanker / Barrel to point of dispensing.
* Fluid Transfer pump from Barrel / tanker to Storage tank.
* Storage Tank.
* Pumping Units and Interconnecting piping.
* Fluid measurement and Dispensing.
| A/C Gas & Special Gas Filling |
| * A/C Gas |
| * Carbon Dioxide Machine |
| * Nitrogen Filling Machine |
| |
| Wind Shield Fluid Filling |
| |
| Dispensers For : |
| * Diesel |
| * Engine Oil |
| * Petrol |
| * Transmission Oil |
Vacuum Based Filling Machines
Fluid circuit is evacuated to remove air from the system. Circuit is checked for leakages by holding vacuum by vacuum decay method. If required, leak check is carried out with dry air / nitrogen.
Liquid Filling is carried out only when there is no leak in the system.
Complete operation is controlled by PLC.
| Brake / Clutch / Steering |
| * Brake / Clutch Fluid Filling |
| * Radiator Coolant Filling |
| * Refrigerant & A/C Gas Filling |
| * Steering Oil Filling |
| |
| Centralized Fluid Handling System |
* Fluid Handling System for Plant
* Total Solution : Unloading from tanker to point of dispensing
* Centralised Fluid Handling Systems
* No Barrel Handling on the shop floor
* No Spillages on the shop floor
* Centralised Consumption monitoring to reduce wastage / pilferage
* Microprocessor / PLC based systems |
|
